Turn on the gas fireplace is crucial for the warmth and dimension that can be an experience. Unlike traditional wood-burning fireplace, a gas fireplace is often self-starter. Unlike an electric fireplace, gas fireplace requires the use of a night, like a gas stove or water heater.
Make sure to find your home for a small flame, which is known as a pilot. If you are not aware of that flame, while you turn the first driver, before starting the gas fireplace. Instructions for lighting the pilot are:
If you have a front decorative panel or on the grill, gas fireplace, provided that, before turning off the pilot.
The valves on their own on the back of a plate located. If so, look for this particular panel and free access to the valves and keys.
Make sure all controls are disabled and the driver is actually disabled.
Make sure the control valve and main gas valve is off. If the control valve or the main gas valve, and wait at least five minutes for the gas to clear before proceeding. This important step will help to accidents with gas fireplace.
Remove all interior doors made of glass if you have not already done so.
Smell around the fireplace to ensure that no gas could be available to start the driver. Be sure to smell near the floor because the gas is heavier than the surrounding air. If the home is not allowed to have less than five minutes before going on air. If the smell of gas is not removed and was again to ensure that all valves are turned off proven, you must designate a named professional for losses.
If this is a smell of gas, close the main valve and pilot valve.
Push the control valve in about a quarter of an inch, when you turn. If you do not push the valve internal control of his hand, a telephone technician. No groping elements and overpressure valve. Forcing the tap is not only a fire hazard, but it can also lead to an explosion.
Press the pilot valve in at least 15 to 30 seconds, press the piezo spark plug several times in the range of times per second in the order of the driver. After the pilot looks like a small flame. If the driver does not remain after several attempts, the phone number of a qualified technician.
Maintain the pilot valve in 60 seconds or more to heat your thermopile. When the thermopile is heated, the recorder starts.
Once the burner is on, change the ignition control valve and thermostat setting you prefer to change. The temperature controller, a switch on the bottom, a standard light switch, dimmer, or can be started by remote control.
Of course, you change the window of the inner door, a bottom cover, decorative glass or grilled, and that is correct, the respective guaranteed by the fireplace. Enjoy your home!





